+385(0)40 390 167 mail@servus.hr

Wolfram WCe Elektroda

For tungsten inert gas welding (TIG), the non-fusing and temperature resistant tungsten electrode, in addition to the torch, the energy source and the inert gas, is a major factor for obtaining optimum results.

The following must be taken into consideration when selecting the tungsten electrode:

  • Type of tungsten electrode
  • Diameter of electrode
  • Quality of the polished section and roughness of the electrode
  • Tip geometry of the electrode

By adding cerium oxide (CeO2), these electrodes have an increased capacity compared to pure tungsten electrodes, however the WCe electrodes have a lower capacity than the E3® and WL electrodes. Main areas of application are in the DC and AC welding of non-alloyed and high-alloyed steel, aluminium, titanium, nickel, copper and magnesium alloys in the low and middle current range.

WCe 20 = Grey

Kategorije: ,